Last updated on : October 29th, 2022 at 09:39 am
Are you wondering how do cut proof gloves work? This type of gloves is designed in such a way that your hands will be protected against sharp objects.
It can be made of various materials, including stainless steel, Kevlar, and some other high-strength synthetic fiber.
The synthetic fiber is tightly woven together to create a strong protective layer. In other words, it is difficult to cut them.
Usually, these gloves also have an inner lining made of soft material like leather. This helps prevent sharp objects from cutting through your gloves and your hands.
But more importantly, those gloves are lined for your comfort as the outer layer of the glove is hard.
This type of gloves is commonly used in various industries at high risk to cut injuries, including manufacturing, health care construction, and food service.
Military and law enforcement personnel also make use of cut proof gloves. As you can see, it can be used for a number of applications.
But this is not the end to this. They’re so much more about cut proof gloves. Continue reading and get more information.
3 Tips On How To Pick The Right Cut Proof Gloves
As mentioned earlier, cut-proof gloves offer protection against various sharp objects, including broken glass, razor blades, and knives.
However, they are not entirely resistant to puncture. If you do not use them correctly, they may be damaged by a sharp object.
But when you pick suitable gloves, you may be able to maximize their cut-resistant property. Keep in mind the following tips.
Tip #1. Check the strength
When we say strength, this pertains to that of the glove material, mainly the yarn. It should be made of strong fibers.
Two of the strongest fibers for protective gloves include HPPE and para-aramid polyethylene.
Those terms may be unfamiliar to you. But you might have heard of their most famous brands, including Kevlar for para-aramid and Dyneema for HPPE.
The most common among the two is Kevlar. Gloves made of Kevlar are made of the same materials utilized for bulletproof vests.
But despite the strong fibers, they may not cut resistant with an ANSI rating of level two.
However, when this is blended with some other element, it can produce higher cut resistance levels.
Tip #2. Check the hardness
You might have heard of cut-proof gloves with steel or glass. Those products make the corner of the gloves hard.
You need to check on the hardness. In other words, see to it that it has an excellent ability to make a blade dull.
The hardness of the gloves was made possible by designing hard and high-density substances for the yarn used for the gloves.
But the good thing is that you will not feel your gloves have glass or steel inside them.
Tip #3. Know its rolling action
Look at the yarn closely; you will see that it is made up of three pieces. But you will not identify the numerous filament fibers making up each piece.
The way those filament fibers move together will determine the cut resistance level.
There is a rolling action that can absorb a blade’s impact. This is also referred to as the slipperiness of those fibers.
Tip #4. Consider the type of work you do
You can find plenty of Kevlar gloves in the market. They are offered in various styles, including fingerless, half-finger, and full-finger.
You need to identify which one suits you better, considering the type of work you do.
You can stay protected if you know what type of gloves protects your hands from hazardous chemicals.
But this should start by knowing the hazards you will likely face at work.
Of course, you would want to remain protected while your dexterity is not compromised.
Furthermore, you must use a pair of protective gloves and other PPEs or personal protective equipment like face shields and aprons.
Again, it will depend on your job. The ultimate guide to work gloves might be helpful to you.
To learn more about cut-proof gloves, read the benefits of using them in the next section.
The Benefits Of Using Cut Proof Gloves
You have to take note that these gloves are only cut-resistant. They are not fully cut-proof. But then, it is still beneficial to wear this. So, how do cut proof gloves work?
Below is the list of the benefits of using cut-proof gloves when working in construction, manufacturing, health care, or food service.
#1. Hand protection against cuts and other injury types
These cut-resistant gloves will be a barrier between your skin and the sharp objects encountered at the work site.
With that, it can help you avoid getting cuts in the first place. Because it will prevent them.
#2. Reduced impact
In instances where you accidentally end up puncturing yourself with a knife or other sharp objects, the gloves you wear will reduce the severity of the cut.
This can happen because the gloves will absorb some of the impacts that are supposed to be faced by your hands when you do not wear protective gloves.
#3. High-quality standards
About 70 percent of workers have experienced finger and hand injuries while working on their projects without gloves.
Every worker needs these gloves for cut protection. The level of protection your cut proof gloves offer is measured by ISEA or ANSI cut score test.
The rating can vary from A1 to A9. The higher the ISEA or ANSI score, the more protection offered against cuts compared to gloves with a lower cut score.
All manufacturers ensure that the cut proof gloves pass the standards with a high cut score to ensure safety.
Frequently Asked Questions (FAQs)
It would also be good for you to read this section as well. You will learn more about cut proof gloves.
That is because we will answer people’s most commonly asked questions about cut-resistant gloves.
So what are you waiting for? Scroll down and learn more!
#1. How do cut-resistant gloves differ from regular gloves?
It is the material used that makes them unique. High-strength gloves like steel and Kevlar are used for these types of gloves.
They are specifically designed to protect the hands of anyone wearing them against abrasions, cuts, and other injuries that may take place in the workplace.
Accidents are inevitable when you work with machinery and sharp tools, so it is essential to wear this type of gloves and not those regular ones.
#2. What are the drawbacks to wearing cut proof gloves?
Wearing cut proof gloves comes with a number of drawbacks. For one thing, those gloves can be pricy.
You will also feel discomfort when wearing them for too long.
Not only that, but your gloves will make it hard for you to perform delicate tasks, especially those that require dexterity.
Lastly, other people are allergic to the materials used for this type of gloves.
#3. How much is a cut-proof glove?
The price will vary depending on the type of cut-proof gloves you need. Another factor is the retailer from which you will purchase them.
But generally, you can expect it to be somewhere between 10 to 100 dollars. Any gloves falling in this price range must be of good quality.
#4. How to care for your cut proof gloves?
You can prolong the lifespan of your cut-resistant gloves and maintain their conditions with some essential tips.
First, ensure to inspect your cut proof gloves before every use. This ensures that your gloves have no holes, rips, or other damage.
Otherwise, the cut resistance ability will be compromised. In case you notice that there is damage, you should discard your gloves and use another pair.
#5. What are the most well-known cut-resistant gloves?
You can find a lot of cut-proof gloves offered on the market today. Among the most popular ones include Radians. PIP, and Ansell.
These brands offer a myriad of gloves in various styles. They are designed to protect your hands against cuts and other injuries.
Ansell is among the leading manufacturers when it comes to cut proof gloves.
It’s A Wrap!
I’m delighted that you made it here until the end of this post on how do cut proof gloves work.
Take note that those types of gloves need regular inspection to detect damage. Also, you need to replace them when needed.
Without protective gloves, you do not want to expose yourself to danger at work.
Keep in mind that cut-resistant gloves help prevent injuries against sharp objects such as glass, blades, and knives.
That’s pretty much it for today’s article! Thank you for reading.